Rifle reloading – handloading data for rifle calibers

On the list below, you can find all the rifle reloading data we have currently available. For flexible usage, we provide our reloading data in metric and imperial dimension systems, i.e. charge weight in grams and grains as well as muzzle velocity in meters and feet per second. All the rifle loads on these pages are pressure tested according to the C.I.P. method. The listed maximum loads should never be exceeded. Please note that due to safety regulations, we can’t suggest or recommend loads or bullets that are not available on this site.

We wish you successful reloading with Vihtavuori premium rifle powders!

Disclaimer

All of this reloading information has been provided by Nammo Lapua Oy and Nammo Vihtavuori Oy. The data given here were obtained in laboratory conditions following strictly the CIP (Commission International Permanente) June 13, 1990 and November 9, 1993 rules. The listed maximum loads have been determined according to the respective CIP/SAAMI maximum pressure specification, whichever is lower. These test methods have been deemed to be safe throughout the world. Pressure is measured at the case mouth or from inside the case according to the CIP.
DO NOT ATTEMPT ANY EXTRAPOLATIONS. PLEASE FOLLOW THE DATA AS WRITTEN. IT IS A MUST FOR EVERY RELOADER TO READ THE RELOADING SAFETY RULES.

---